Oncology Services & Support
Hardware Specifications
Citrix Server Requirements - Rack Mounted
| Platform: |
DELL® R610 - (1U) |
| Processor: |
Dual Intel® Xeon® X5650, 2.66Ghz, 12M Cache,Turbo, HT, 1333MHz |
| Bus Type: |
PCI-E |
| Memory (RAM): |
48 GB Memory, 1333 MHz Dual Ranked RDIMMs for 2 Processors, Optimized |
| Hard Drives (Local Storage): |
3x146GB 15K RPM Serial-Attach SCSI 6Gbps 2.5” Hot Plug Hard Drive. |
| Drive Controller: |
Internal PERC H700 Integrated RAID[2] Controller with 512MB of battery-backed cache with (50/50) read/write cache enabled
Configure channel one: 3x146GB (RAID 1 + 1HS)
DVD operates from SATA CONTROLLER ON BOARD
|
| Optical Drive: |
Internal Slim optical DVD ROM |
| Backup Tape: |
None |
| Network Interface: |
Dual Two-Port Embedded Broadcom® NetXtreme II™ 5709 Gigabit Ethernet NIC |
| Redundancy: |
PSU and Fans |
| Ports: |
1 serial, minimum 2 USB |
| Operating System[6]: |
ARIA (Version 10.0)[7]: Windows® Server 2008 R1 (Standard) with Service Pack 2 (5 client access licenses or sufficient seat licenses) |
File System: NT File System (NTFS) |
Server
- Volume C: 80GB
- Volume D: ~66GB
|
| Windows® OS Architecture: |
64-bit |
| Microsoft® .NET Framework: |
ARIA(10.0): 1.1, 2.0, 3.0, and 3.5 |
Other Software:
- Microsoft® Terminal Client Access Licenses
- Citrix Presentation Server® 4.5 Advanced Edition (32-bit), English only → ARIA for Medical Oncology
- Citrix XenApp™ 5.0 Advanced Edition (64-bit), English only → ARIA for Medical Oncology
- Citrix Presentation Server 4.5 Advanced Edition (32-bit), English only → ARIA for Radiation Oncology (v10.0)
- Citrix XenApp 5.0 Advanced Edition (64-bit), English only → ARIA for Radiation Oncology and Eclipse (v10.0)
Notes:
- CPU identified above is for Intel®'s Nehalem or Westmere (microarchitecture). Each CPU has three or four separate memory controller hubs (MCHs) within the CPU package, and requires each memory channel to be populated per CPU for optimal use.
- Software RAID is neither recommended nor supported with the Citrix Server.
- Review the Citrix Road Map on qualifying Citrix Presentation Server and XenApp with ARIA for Radiation Oncology and Eclipse.
- ARIA for Radiation Oncology and Eclipse version 10.0 are supported within an English language Citrix Farm only.
- Eclipse version 10.0 is only supported within a 64-bit Citrix Farm.
- Windows® Server 2008 R2 is currently not compatible with ARIA for Medical Oncology, ARIA for Radiation Oncology, or Eclipse Version 10.0
- Other compatible Windows® operating systems include: Windows® Server 2003 R2, Standard or Enterprise, SP2, 32-bit only.
- Recommended configuration above is for a Single Citrix Server or the First Server in a Citrix Farm.
- Load Balancing and High Availability (N+1) Citrix Server shall use the same recommended hardware; however, RAID controllers, hot spare drives, and redundant power supplies are not required.
- 1 Gbps network recommended for maximum speed and performance.
- Specifications subject to change without notice as newer computer models become available.
- Hardware used with ARIA for Radiation Oncology and Eclipse must be approved based on the current Microsoft® specifications.
- Additional Citrix Servers should be planned and accounted for based on concurrent user count.
- ARIA for Medical Oncology will normally support approximately 50 concurrent users on one (1) Citrix Server.
- ARIA for Radiation Oncology will normally support these concurrent users on one (1) Citrix Server per Client Type row but not combined in the table below:
| Client Type |
Application Intance (at 100% load) |
~%CPU & Memory/Application Instance |
Data Type |
ARIA Practice Management (Patient Manager, Time Planner, ...) |
50 |
2 |
Textual data |
ARIA Radiation Oncology
(RTChart, Offline Review,...) |
23 |
4 |
Textual and 2-D Image data |
| Eclipse |
17 |
6 |
Textual and 2-D/3-D Image data |
| Duet |
23 |
4 |
Textual and 2-D Image data |